Battery Equaliser
Panasonic Alkaline
AA Batteries |
Together means Great Savings |
 |
6 oz. |
Only $12.95
Receive One
Free 4 Pack
AA Batteries
|
|
12 oz. |
Only $19.95
Receive One
FREE 4 Pack
AA Batteries
|
|
32 oz. |
Only $49.95
Receive Two
FREE 4 Pack
AA Batteries
w/Free Syringe
|
| Add To Cart | Bottle - Equaliser 6 oz. Bottle for 3 motorcycle batteries, or 2 car batteries | $12.95 |
| Add To Cart | Bottle - Equaliser 12 oz. Bottle for 4 auto batteries or 1 8-D size battery | $19.95 |
| Add To Cart | Quart - Equaliser 32 oz Quart size Container 10 Batteries or Fork Lift | $49.95 |
Double Battery Life!!
Guaranteed with 1 year Free Roadside Assistance.
Add to your RV, Boat, Jet Ski, Truck, Car or Fork Lifts to extend
the life of your battery!
View Label
|
(Because of the many different sizes of batteries, please refer to Dosage Formula below before treating with Battery Equaliser.)
|
Dosage Formula Usage Chart:
12 Volt Car Battery - 1/2 oz. per cell
12 Volt Deep Cycle Battery - 1 oz. per cell
6 Volt Car Battery - 1 oz. per cell
6 Volt Golf Cart Battery - 2 oz. per cell
12 Volt Large Truck Battery - 2 oz, per cell (8HD or 8D)
24-36-48 Volt Forklift Battery - 3 1/2 oz. per cell
STN & 6TL Batteries - For Military Use 1 oz. per cell
Battery Equaliser the Solution for Internal Resistance & Sulfation:
Lead acid batteries have changed very little in 70 years. From the initial application of the electrolyte, sulfation begins coating the lead plates causing internal resistance. Aging batteries lose overall performance and require increased maintenance (more water) and charging time. Sulfation will eventually choke out any electrical activity. Stored and inactive batteries accelerate the problem of sulfation, leading to REDUCED BATTERY LIFE.
A small amount of Battery Equaliser reduces resistance and sulfation. Add Battery Equaliser to each cell will mix with the existing electrolyte solution. The improved battery chemistry will dissolve existing sulfation and prevent new deposits from forming for years to come. Batteries will charge faster, hold a charge longer, reduce terminal corrosion and reduce gassing (water consumption). Follow normal battery maintenance and DOUBLE BATTERY LIFE WITH ONLY ONE TREATMENT.
How Battery Equaliser Works:
A battery is a group of galvanic cells joined together by a group bar connected in varied series. It is important that each cell carries the same values as its partner i.e. same ampere per hour rating, same voltage, same specific gravity of electrolyte.
The simplest method of checking is usually conducted by measuring specific gravity with a hydrometer. If each cell's electrolyte registers 1260 @ 26 degrees, this means that the cell is fully charged and should perform normally.
What happens when these readings vary from cell to cell? If a battery is composed of perhaps twenty four cells and one of these cells appears to be healthier than the rest it is most probable that this cell will become overloaded. This overload may evolve into "thermal runaway" causing the cell to explode. Battery Equaliser through the cleaning process allows each plate and separator to continue functioning in the manner intended - equal voltage, equal amps and equal specific gravity in each battery cell.
The concept of cleaning out batteries has been going on for years. People used to wash them out using a simple jet of water or quite commonly a mixture of Epsom salts and water, indeed the researchers of Battery Equaliser have come across this mixture being commercially marketed by some astute entrepreneurs. Of course there are a great many drawbacks to this process, i.e. It takes away many of the elements originally placed by the battery manufacturers. the salts will attack the lead, dry it out so that it may become even more brittle and totally upset the specific gravity levels.
A collection of concepts and research conducted on scientific basis was embarked upon in 1978. Advisement from institutes and experts from all over the world was applied, to the development of Battery Equaliser.
Battery Equaliser is designed to clean and alloy the working parts within a lead acid battery by means of electrochemical reaction.
Directions for use:
- Shake well before using.
- Avoid contact with metals and direct sunlight.
- Wear safety glasses while working around batteries.
- Check acid level in each cell.
- Add Battery Equaliser to battery according to chart below.
- Charge battery after treatment or continue with normal use. Allow 5 Charge/Discharge cycles for maximum effect.
- Wash with soap and water to remove electrolyte and Battery Equaliser.
Environmental Protection:
By using Battery Equaliser you can help reduce hazardous waste in land fills. Reduced gassing decreases the amount of dangerous airborne lead and sulfuric acid released in our environment, particularly in the work place (a closed environment).
Read a Battery Equaliser Testimonial
View the Battery Equaliser MSDS
| 
